The structure of the robotic arm | remote manipulator arm

The structure of the robotic arm | remote manipulator arm

The telescopic and lifting movement of the arm is generally driven by a linear oil (gas) cylinder, or realized by a motor through a screw rod and a nut.

When the rotation angle of the arm is less than 360°, the swinging oil (gas) cylinder is usually used; when the rotation angle is greater than 360°, the linear cylinder is used to realize the red rack, gear, chain, and sprocket.

(1) The arm moves in a straight line.

(2) The swing of the arm.

(3) The pitching movement of the arm.

As the technology of the robotic arm is further improved, its adaptability will be stronger and its application will be wider!
remote manipulator arm

分享这篇文章: